Yulong Petrochemical Acrylonitrile Butadiene Styrene (ABS) A-2020

$1.50

Acrylonitrile Butadiene Styrene (ABS) A-2020 is a high-flow injection molding grade, ideal for automotive parts, small appliances, and building materials. It offers strong mechanical properties (tensile strength ≥42 MPa, flexural strength ≥60 MPa) and good whiteness, ensuring easy processing, smooth surface finish, and excellent toughness for general-purpose applications.

分类： ABS

描述

Yulong Petrochemical Acrylonitrile Butadiene Styrene (ABS) A-2020

ABS A-2020
ABS-YULONG
Introduction
Product Description
Supplier	YULONG
Material Status	Commercial:Active
Technical Data
PHYSICAL		Nominal value	Unit	Test method
Melt Flow Rate
220℃,10kg		19.1	g/10min	ASTM D1238
MECHANICAL		Nominal value	Unit	Test method
Rockwell Hardness		111	R	ASTM D-785
Tensile Strength		46.3	MPa	ASTM D638
Elongation at Break		13	%	ASTM D638
Flexural Strength		65.8	MPa	ASTM D790
Flexural Modulus		2400	MPa	ASTM D790
THERMAL		Nominal value	Unit	Test method
Vicat Softening Temperature		94.4	℃	ASTM D1525
Process Conditions
No Data
Disclaimer
The information in this data table was obtained from the manufacturer of the material,and the author made every effort to ensure the accuracy of this data. The document provider does not assume any legal responsibility and strongly recommends verifying with the material supplier before the final selection of materials.
The copyright belongs to the original author.If there is any infringement,please contact us immediately.

其他信息

重量	25 公斤
尺寸	75 × 45 × 25 厘米

评价

目前还没有评价

成为第一个“Yulong Petrochemical Acrylonitrile Butadiene Styrene (ABS) A-2020” 的评价者